PRODUCTS & APPLICATIONS
FRP grating and SMC fiberglass molded products have passed ABS certificate, ASTM E84 and D635 test. The production, inspection, testing, installation and service are strictly managed and controlled under ISO9001:2000 system.
Normal Grating
Concave Surface
Concave grating provides slip resistance
Gritted Surface
Gritted grating, superior slip resistance
Flat Surface
Not slip-resistance, usually decorative
Covered Grating
Decorative Pattern Cover
Decorative plate slip resistance & beautiful
Grit Cover
Gritted plate, perfect slip resistance
Smooth Cover
Flat panel No slip resistance
*Covered grating can be made special hole to be as filter panel
Grating Legs
A: FIXED-HEIGHT LEGS /SINGLE HEAD - For supporting grating up to 60" above level concrete floor.
B: FIXED-HEIGHT LEGS /DOUBLE HEADS - For connecting adjoining panels.
C: ADJUSTABLE-HEIGHT MINI LEGS - For raising grating 2-3/4" to 9" above uneven concrete floor.
D: ADJUSTABLE-HEIGHT LEGS /SINGLE HEAD - For uneven floors designed to be screw-adjusted from atop the elevated floor.
E: ADJUSTABLE-HEIGHT LEGS /DOUBLE HEADS - For joining and supporting panels above non-level concrete floor.
Leg Connectors
Specially designed legs for 1-1/2" deep, 1.5" 1.5" square mesh molded grating are manufactured to provide sturdy support for elevated flooring. All fixed-height and adjustable legs support flooring for heights up to 60 inches. (Cross bracing is required for flooring elevated more than 24 inches.)
FRP Pultruded Grating Standard Panel
| Type | height | Top edge width | space between | clearance width | Open Area | Estimated weight |
| inch | inch | inch | inch | % | Kg/m2 | |
| I-1040 | 1" | 0.6" | 1" | 0.4" | 40% | 17.1 |
| I-1050 | 1" | 0.6" | 1.2" | 0.6" | 50% | 14.2 |
| I-1060 | 1" | 0.6" | 1.5" | 0.9" | 60% | 11.3 |
| I-1540 | 1.5" | 0.6" | 1" | 0.4" | 40% | 22.0 |
| I-1550 | 1.5" | 0.6" | 1.2" | 0.6" | 50% | 19.1 |
| I-1560 | 1.5" | 0.6" | 1.5" | 0.9" | 60% | 16.2 |
| Type | height | Top edge width | space between | clearance width | Open Area | Estimated weigh |
| inch | inch | inch | inch | % | Kg/m2 | |
| T-2033 | 2" | 1.0" | 1.5" | 0.5" | 33% | 21.0 |
| T-2050 | 2" | 1.0" | 2.0" | 1.0" | 50% | 16.5 |
Clips, Bolts & Washers
All sides of FRP grating should have support, and the support should be at least 40mm width. The clip must be used in the middle of 900~1800mm. Minimum four clips per side is required for full size panels. Support has to be used under the joint of two grating products."M" and "L" clips are used as connector between grating and framework. "C" clip connects two pieces grating. Clips are sold as sets consisting of clip, bolt, nut and washers. They are all made from stainless steel. If the FRP grating should be installed highly, we can supply the grating legs
Handrail Systems
There are two types of FRP handrail systems.
FRP Mould
GratingFRP Mold pultrusion is produced by special steels. GratingFRP can provide mold tube, mold angle iron,mold channel, mold rod and mold flat strip etc. We can design and manufacture tooling for any production need, provide us a profile and the product's performance requirements and we will do the rest.